Ricoh Aficio FX10 Service Manual page 226

June 10th, 1997
7.2.2. Book Scanner
1. Abnormal Noise
Possible Cause:
•
Obstruction in the scanner drive path.
•
Malfunction in the scanner drive components.
Action:
•
Do the scanner test (service function 10) and check that the scanner
moves correctly. If not, check that the scanner drive components are
working properly, and also check for obstructions in the scanner drive
path.
•
If there is noise coming from the guide shaft, lubricate all surfaces of the
shaft with Launa oil (refer to section 6.2.1 for details).
2. Scanner Home Position Error (Error Code 9-11)
Possible Cause:
•
The scanner drive wire is out of position.
•
The scanner drive wire is damaged or broken.
•
Malfunction in the scanner drive components.
•
Obstruction in the scanner drive path.
•
The red clip which secures the scanner has not been removed. (This
clip should be removed at installation.)
Action:
•
Check that the scanner drive components are in the correct position.
•
Check that the scanner drive wire is positioned correctly.
•
Check for obstructions in the scanner drive path.
•
Check that the spring which secures the drive wire to the scanner is
working properly and replace if it is damaged.
•
Check that the scanner release lever is unlocked.
MECHANICAL PROBLEMS
7-21
TROUBLESHOOTING