Ricoh Aficio FX10 Service Manual page 239

TROUBLESHOOTING
ERROR CODES
Code Meaning
9-11 Home position not
detected in book scanner
mode
9-12 Cover open detected
during printing
9-17 Charge corona unit failure If the problem persists, replace the FCU.
9-20 Laser diode failure
9-22 Fusing lamp failure
9-23 Hexagonal mirror motor
failure
9-24 Main motor failure
9-80 Bypass feed - paper non-
feed or jam at the
entrance
9-81 Bypass feed - paper
length exceeds the
maximum limit (600 mm)
9-82 Optional 100 sheet
cassette - paper non-
feed or jam at the
cassette entrance
9-83 Optional 100 sheet
cassette - paper length
exceeds the maximum
limit (600 mm)
Suggested Cause/Action
If the problem persists, replace the FCU.
Cross reference
Charge corona failure - Section 7-3
Close the cover, or check the cover sensors.
Cross reference
Charge corona failure - Section 7-3
If the problem persists, replace the FCU.
Cross reference
LD failure - Section 7-3
If the problem persists, replace the FCU.
Cross reference
Fusing lamp failure - Section 7-3
If the problem persists, replace the FCU.
Cross reference
Mirror motor failure - Section 7-3
If the problem persists, replace the FCU.
Cross reference
Main motor failure - Section 7-3
Check the registration roller and sensor.
Cross reference
Printer mechanical problems - Section 7-2-2
Check the paper feed mechanism and sensors.
Cross reference
Printer mechanical problems - Section 7-2-2
Check the paper feed mechanism and sensors.
Cross reference
Printer mechanical problems - Section 7-2-2
Check the paper feed mechanism and sensors.
Cross reference
Printer mechanical problems - Section 7-2-2
7-34
June 10th, 1997