Ricoh Aficio FX10 Service Manual page 108

June 10th, 1997
System Switch 09
No FUNCTION
Priority given to various
types of remote terminal ID
when printing reports
7 0: RTI > CSI > Dial label >
Tel. number
1: Dial label > Tel. number
> RTI > CSI
System Switch 0A - Not used (do not change the settings)
System Switch 0B
No FUNCTION
Automatic reset timer
Bit 1 Bit 0 Timer setting
0
0 0 1 minute
0 1 3 minutes
1
1 0 5 minutes
1 1 No limit
Power Saver Mode timer
Bit 3 Bit 2 Time Limit
2
0 0 1 minute
0 1 3 minutes
3
1 0 5 minutes
1 1 No limit
4-7 Not used
System Switch 0C
No FUNCTION
0-2 Not used
Original size to be used for ADF original size detection
3
0:A4, 1: Letter
4-7 Not used
System Switch 0D
No FUNCTION
0-2 Not used
Original size to be used for book original size detection.
3
0: A4, 1: Letter
4-5 Not used
Paper size to be used when GLG size is selected for optional cassette.
6 0: F4
1: Government Legal
7 Not used
SERVICE TABLES AND PROCEDURES
COMMENTS
This bit determines which set of priorities the machine
uses when listing remote terminal names on reports.
Dial Label: The name stored with the Quick/Speed Dial
number by the user.
COMMENTS
(1, 1): Automatic reset is disabled.
(Other): The machine returns to the standby mode
when the timer expires after the last operation.
(1, 1): Automatic Power Saver Mode is disabled.
(Other): The machine goes into a Power Saver Mode
when the timer expires after the last operation.
Cross reference
Power Saver Mode: Sections 2.3.1
Do not change the settings.
COMMENTS
Do not change the settings.
Do not change the settings.
COMMENTS
Do not change the settings.
Do not change the settings.
Do not change the settings.
4-23
BIT SWITCHES