Ricoh Aficio FX10 Service Manual page 70

June 10th, 1997
Incoming pages that are longer than the maximum length will not be reduced,
but will be printed on two pages and treated in accordance with the setting of
bit 1 of bit printer switch 00. If this bit is 1, the bottom few lines of the page
will continue from where the first page left off.
Reduction Disabled
If bit 0 of printer switch 03 is at 0 (Disabled), the data will not be reduced.
However, if the incoming page is up to x mm longer than the copy paper, the
excess portion will not printed. The value of x can be from 0 to 15 mm. It is
determined by the setting of bits 4 to 7 of printer switch 03.
Hex value
0
0
F
Messages more than x mm longer than the copy paper will be printed out on
two pages in accordance with the setting of bit 1 of printer switch 00 as ex-
plained earlier.
Value of X
and so on until
15
2-41
DETAILED SECTION DESCRIPTIONS
0
1
PRINTING