Ricoh Aficio FX10 Service Manual page 197

REPLACEMENT AND ADJUSTMENT
IMAGE ADJUSTMENT
6.11. IMAGE ADJUSTMENT
6.11.1. Overview
This section explains how to adjust various scanning and printing parameters.
Among these are the margin parameters shown in the diagram below, which
are named in accordance with the table below the diagram.
Parameters Description
W1 Left margin
W2 Print/Scan width
L1 Top margin
L2 Print/Scan length
Bottom margin
L3
CAUTION
The factory settings may not be the same as the "Initial settings"
described in the following procedures. The RAM reset level 1 will reset
all the scan and print margin parameters to the "Initial settings."
W 1 W 2
Fax - Tx
Not adjustable
Not adjustable
Scanner
Not adjustable
Scanner
(ADF only)
6 - 36
June 10th, 1997
Adjustable by
Fax - Rx
Scanner/Printer Scanner/Printer
Not adjustable Not adjustable
Printer Scanner/Printer
Not adjustable Not adjustable
Not adjustable Not adjustable
H523R560.wmf
Copying