Table of Contents
Advertisement
June 10th, 1997
Communication Parameters
Mode
DCS: ITU-T standard
Modem rate
144: 14400 bps
120: 12000 bps
96: 9600 bps
72: 7200 bps
48: 4800 bps
24: 2400 bps
Communication
ECM: With ECM SSC: Using SSC
mode
EFC: Using EFC NML: With no ECM, SSC, or EFC
Compression
MMR: MMR compression
mode
MR: MR compression
MH: MH compression
Resolution
SSF: Fine, transmitted at 200 x 400 dots per mm
DTL: Detail, transmitted at 200 x 200 dots per mm
STD: Standard, transmitted at 200 x 100 dots per mm
I/O rate
0M: 0 ms/line
2/M: 2.5 ms/line 20M: 20 ms/line
5M: 5 ms/line
Width
A4: A4 (8.3"), no reduction
System Switch 01
No
FUNCTION
PM call
0: Disabled
0
1: Enabled
1-7 Not used
SERVICE TABLES AND PROCEDURES
NSS: Non-standard G3
10M: 10 ms/line
40M: 40 ms/line
COMMENTS
This bit switch determines whether the machine will
send an Auto Service Call to the service station when it
is time for PM.
Cross reference
Auto service calls: Section 2.3.2
Do not change the settings.
4-19
BIT SWITCHES
Advertisement
Chapters
Table of Contents
