Ricoh Aficio FX10 Service Manual page 151

SERVICE TABLES AND PROCEDURES June 10th, 1997
SERVICE RAM ADDRESSES
8000A1(H) - User parameter switch 01
Bit 0: Auto Image Density home position 0: Off, 1: On
Bit 1: Not used
Bit 2: Copy/Fax key home position 0: Fax, 1: Copy
Bits 3 to 6: Not used
Bit 7: Settings return to home position after transmission 0: Disabled, 1: Enabled
8000A2(H) - User parameter switch 02
Bits 0 to 2: Not used
Bit 3: TSI inclusion in transmitted messages 0: Disabled, 1: Enabled
Bits 4 to 7: Not used
8000A3(H) - User parameter switch 03 (Automatic report printout)
Bit 0: Transmission result report (memory transmissions) 0: Off, 1: On
Bit 1: Not used
Bit 2: Memory storage report0: Off, 1: On
Bit 3: Not used
Bit 4: Polling result report (polling reception)0: Off, 1: On
Bit 5: Transmission result report (immediate transmissions) 0: Off, 1: On
Bit 6: Not used
Bit 7: TCR (Journal) 0: Off, 1: On
8000A4(H) - User parameter switch 04
Bits 0 to 6: Not used
Bit 7: Inclusion of a sample image on reports0: Off, 1: On
8000A5(H) - User parameter switch 05
Bit 0: Substitute reception0: Off, 1: On
Bit 1: Memory reception if no RTI or CSI received 0: Possible, 1: Impossible
Bits 2 to 5: Not used
Bit 6: Fusing lamp during the energy saver mode
0: Lamp of, 1:Standby temperature (80 °C)
Bit 7: Not used
8000A6(H) - User parameter switch 06
Bit 0: TTI0: Off, 1: On
Bits 1 to 7: Not used
4-66