Table of Contents
Advertisement
June 10th, 1997
2. Paper Jam - Inside the Printer
Possible Cause:
•
A non-recommended type of paper is being used.
•
The paper end fence and/or the paper guides in the cassette is not prop-
erly set.
•
The registraton roller is dirty.
•
The registration sensor is defective.
•
Obstruction in the paper path.
•
The main motor is defective.
Action:
1. Check if a correct type of paper is being used, and check that the paper
end fence and the paper guides are correctly set.
2. Check for obstructions in the paper path.
3. Check the registration roller and its mechanism. Clean or replace if neces-
sary.
4. Check that the registration sensor is working properly.
5. If the problem still remains, do the following.
•
Check the connections between the FCU (CN15) and the main motor.
•
Replace the main motor.
•
Check the fusing unit drive mechanism. Check that all the gears are
properly installed.
MECHANICAL PROBLEMS
7-23
TROUBLESHOOTING
Advertisement
Chapters
Table of Contents
