Ricoh Aficio FX10 Service Manual page 75

DETAILED SECTION DESCRIPTIONS
SYSTEM FEATURES
Parameters
DEC (1 - 255; 0 = Disabled)
CALL (3 - 15; 0 = Disabled)
CLR
Counters
JAM: Jam counter used to place a
service call
NO-JAM1: Counter used for JAM
counter decrement
NO-JAM2: Counter used for clear-
ing the JAM counter
The system parameter list gives the current DEC and CALL thresholds and
JAM counter value as X, Y, and Z respectively.
The Call Service indicator does not light for an excessive jam alarm, and the
machine can be operated normally after the automatic service call has been
made. Also, the counters related to the jam location are reset to zero automat-
ically after the call. Then the alarm is disabled until either bit 3 or bit 4 of
address 80033d is reset to zero.
3. Periodic Service Call
The periodic service call notifies the condition of the machine to the service
station. The call is made periodically at a time interval programmed in the fol-
lowing RAM addresses.
Call interval: 01 through 15 month(s) (BCD)
00: Periodic Service Call Disabled
Date and time of the next call (Read only)
Year: last two digits of the year (BCD)
Month: 01 through 12 (BCD)
Day: 01 through 31 (BCD)
Hour: 00 through 23 (BCD)
To change these settings after programming, change the call interval. Then
the machine automatically changes the remaining parameters by referring to
the interval and the current date and time.
The Call Service indicator does not light for a periodic service call, so that the
machine can be operated normally after it has sent the service call.
Address (H)
ADF
8001E6
8001E7
(Low) 8001E8
(High)
8001E9
ADF
8001DE
8001DF
8001E0 (Low)
8001E1 (High)
Parameters
2-46
Initial
Settings
Printer
8001EA 10 (H)
8001EB 06 (H)
8001EC 30 (H)
8001ED 00 (H)
Address (H)
Printer
8001E2
8001E3
8001E4 (Low)
8001E5 (High)
Address (H)
June 10th, 1997
Sys. Para.
List
X
Y
—
Sys. Para. List
Z
—
—
800262
800263
800264
800265
800266