Table of Contents
Advertisement
June 10th, 1997
4. PM Call
If PM call is enabled, the machine will make an automatic service call when
the PM counter reaches the PM threshold.
Program the PM call interval at the following RAM addresses.
(Default setting: 60,000 sheets)
Address (H)
800194
800195
800196
Cross reference
PM call enable/disable: System bit switch 01, bit 0
The Call Service indicator does not light for a PM service call, and the ma-
chine can be operated normally after it has made the service call.
5. Effective Term of Service Calls
If a time limit for the effectiveness of service calls is programmed, the ma-
chine stops making automatic service calls after the time limit.
Program the time limit at the following addresses. This function is disabled
when all of these addresses are 00(H).
Year: last two digits of the year (BCD)
Month: 01 through 12 (BCD)
Day: 01 through 31 (BCD)
DETAILED SECTION DESCRIPTIONS
Bits 7 - 4
Tens
Thousands
Hundred thousands
2-47
SYSTEM FEATURES
Bits 3 - 0
Units
Hundreds
Ten thousands
Address (H)
80026D
80026E
80026F
Advertisement
Chapters
Table of Contents
