Extron electronics AXI 22 AT User Manual page 33

Creating Subscriptions Between Transmitters and Receivers
1. Ensure the host PC and AXI are connected to the same network.
2. From the start menu select:
All Programs > Audinate > Dante Controller > Dante Controller
The Dante Controller - Network View screen opens.
Dante Controller auto-discovers Dante devices on the network and advertises itself to
allow other Dante-enabled devices to communicate with it. Transmitters connect to
receivers using the connection matrix.
Figure 26. Routing Tab of Network View Screen
3. To show the transmitters of a Dante device, click the
in the Dante Transmitters panel, such as AXI44-ConfRm1 (see figure 26,
+
The converts to a – sign when the device expands.
4. To show the receivers of a Dante device, click the
the Dante Receivers panel, such as DMP128Plus-MainRack (
5. Click the intersection of the desired transmitter and receiver (
Example: AXI44-ConfRm1 Mic/LineIn-1 is routed to the DMP128Plus-MainRack
Exp_IN-01.
A check mark at the intersection indicates the subscription is made. A check mark also
appears next to the receiver channel.
+
box next to the desired device
+
box next to the desired device in
2
).
3
AXI 22 AT and AXI 44 AT • Dante Controller
above).
1
).
27