Extron electronics AXI 22 AT User Manual page 27

3. The Dante Controller - Network View screen opens. All Dante devices on the
network are discovered and listed.
4.
From the Device menu, select Device View or press <Ctrl+D> on the keyboard (see
figure 16).
Figure 16. Opening Device View
The Dante Controller - Device View dialog opens. Select the device being
5.
configured from the (Select a Dante Device...) drop-down (see figure 17,
Figure 17. Device View and Select a Dante Device Drop-Down
NOTE: If there are multiple AXI devices connected to the network that have not
been renamed, obtain the Dante device media access code (MAC) address of
the desired device from the white label on the rear panel of the device in order to
identify it in Dante Controller.
The Device View dialog populates with the selected AXI information.
Figure 18. Populated Device View Dialog Box
6. Click the Device Config tab (see figure 19,
In the Rename Device panel, enter the new name of the device in the text field. No
7.
spaces are allowed in the name. Names should be significant identifiers. For example,
enter AXI44-ConfRm1 (
8. Click Apply ( ). A confirmation prompt opens.
3
Figure 19. Device Config Dialog, Rename Device
) to open the Device Config page.
1
).
2
AXI 22 AT and AXI 44 AT • Dante Controller
).
1
21