System Board Jumper Settings - Dell EMC PowerEdge T340 DPJ1G Installation And Service Manual

Item Connector
8 INT_USB_3.0
9 Slot 4 PCIE_G3_X4 PCH
10 T_INTRUSION
11 SYS_FAN
12 P2
13 A1, A2, A3, A4
14 P1
15 SATA 0-3
16 SATA_ODD/SSD
17 PWR_EVNT
18 J_SATA_2
19 CPU
20 NVRAM_CLR
21 TPM
22 PWRD_EN
23 IDSDM+ vFlash
24 Coin cell battery
25 CTRL_PNL

System board jumper settings

For information on resetting the password jumper to disable a password, see the
Table 10. System board jumper settings
Jumper
PWRD_EN
NVRAM_CLR
Setting
Description
Internal USB
PCIe card connector 4
Intrusion switch connector
Fan
CPU power connector P2
Memory module sockets
System power P1
Mini SAS connector
Optical disk drive connector
Power event
SATA connector 2
Processor
NVRAM password Jumper
Trusted Platform Module connector
Reset BIOS password jumper
IDSDM+VFlash connector
Coin cell battery
Control panel
Disabling a forgotten password
Description
The BIOS password feature is enabled.
The BIOS password feature is disabled. iDRAC local access is
unlocked at next AC power cycle. iDRAC password reset is enabled
in F2 iDRAC settings menu.
The BIOS configuration settings are retained at system boot.
The BIOS configuration settings are cleared at system boot.
section.
Jumpers and connectors 115