Figure 45. Removing the drive backplane
Next steps
1
Replace a drive backplane.
2
Follow the procedure listed in
Installing the drive backplane
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
3
Remove the front
bezel..
4
Remove the air shroud.
5
Remove all the drives.
Steps
1
Align the slots on the backplane with the hooks on the system.
2
Lower the drive backplane into the system until the release pin locks in place, securing the drive backplane to the system.
3
Connect the data, signal, and power cables to the backplane.
72
Installing and removing system components
After working inside your
system.
Safety
instructions.
Before working inside your
system.