Table of Contents
Advertisement
11.7
Exporting and Importing of Setting Profiles
To transfer all the selected settings from one instrument to another, or
to back up, click on "Equotip – Download device application settings".
The actual settings will be stored in the specified folder on the PC as an
archive.
To re-install stored settings, click on "Equotip – Upload device applica-
tion settings".
11.8
Exporting and Importing of Conversion Curves
Custom conversion curves created on the instrument can be download-
ed to the PC by clicking on "Equotip - Download customer conversion".
All available customer conversions from the instrument will be stored on
the PC in the folder ...\Proceq\EquotipLink\Conversions.
To upload a conversion curve from your PC, choose "Equotip - Upload
customer conversions". This is also possible for existing Equotip3 con-
version curves.
© 2016 Proceq SA
12.
Technical Specifications
12.1
Instrument
Display
7" color display 800x480 pixels
Memory
Internal 8 GB Flash memory
(up to 1'000'000 measurements)
Regional settings
Metric and Imperial units, multi-language
and timezone supported
Battery
Lithium Polymer, 3.6 V, 14.0 Ah
Battery lifetime
> 8h (in standard operating mode)
Power input
12 V +/-25 % / 1.5 A
Weight (of display device)
About 1525 g (incl. Battery)
Dimensions
250 x 162 x 62 mm
Max. altitude
2'500 m above sea level
Humidity
< 95 % RH, non condensing
Operating temperature
0 to 30°C (32 to 86°F)
(Charging, running instrument)
0 to 40°C (32 to 104°F)
(Charging, instrument is off)
-10 to 50°C (14 to 122°F)
(Non-charging)
Environment
Suitable for indoor & outdoor use
IP classification
IP 54
Pollution degree
2
Installation category
2
NOTE! Charging equipment is for indoor use only (no IP clas-
sification).
Table of Contents
45
Hide quick links:
Advertisement
Table of Contents
