WAGO I/O SYSTEM 750
750-498 8AI; TC; Adjust
7.1.1.6
Status Messages
Activate diagnostics!
Activate the diagnostics in the Channel settings menu item to receive status
messages!
This area provides information about occurring diagnostics. If you have activated
diagnostics in the Channel settings menu item and a diagnostic occurs, the
diagnostic is displayed in the status messages window. These status messages
are determined from the status bytes of the individual channels.
Click the button to expand the Status Messages window at the bottom of the
parameterization dialog to display the status messages.
Figure 33: Expanding the Status Messages Window
The following status messages are displayed:
• Group error
• Channel deactivated
• Wire break
• Measurement range overflow
• Measurement range underflow
• User-defined limiting value overrange
• User-defined limiting value underrange
• No error
• Measured values in permissible range
Commissioning
77
Manual
Version 1.0.0