Table of Contents
Advertisement
Rear View
3 4
No.
Component
1
Daisy Chain Port When daisy chaining units, the cable plugs in here.
2
KVM Port
Section
3
Power Socket
4
Power Switch
Note: The CL1016 is pictured above. The CL1008 rear panel is the same as
that of the CL1016, except that it has 8 KVM ports instead of 16.
1
The cables that link to the computers plug in here.
Note: The shape of these SPHD connectors has been
specifically modified so that only KVM cables designed to
work with this switch can plug in (see the Cables section on
page 3, for details). Do NOT attempt to use ordinary 15 pin
VGA connector cables to link these ports to the computers.
This is a standard 3-prong AC power socket. The power cord
from an AC source plugs in here.
This standard rocker switch powers the unit on and off.
2
Description
1. Introduction
7
Advertisement
Table of Contents
