Deleting Contacts And Coils; Creating Or Changing Connections - Eaton easy800 Manual

4 Wiring with 800
4.5 Working with contacts and coils

4.5.4 Deleting contacts and coils

4.5.5 Creating or changing connections

114
Control Relay easy800 11/11 MN04902001Z-EN www.eaton.com
The easy800 device closes entry mode as soon as you leave a contact or coil
ú í
field with or OK.
In the contact field to change
to
I 02
I 01 I 02
1 x í +
M 03
1 x Í
Q 04
HW 05
... 06
.
.
.
OK
99
▶ Use
ú í ÍÚ
to move the cursor to a contact or coil field.
▶ Press DEL.
The contact or the coil will be deleted, together with any connections.
l
Contacts and relay coils are connected with the wiring arrow in Connect
mode. The easy800 device displays the cursor in this mode as a wiring
arrow.
▶ Use
ú í ÍÚ
to move the cursor to the contact or coil field from which you
wish to create a connection.
￫
Do not position the cursor on the first contact field. Here the
ALT button has a different function (add rung).
▶ Press ALT to switch to "Connect mode".
▶ Use
ú í
to move the arrow between the contact and coil fields and use
to move between the rungs.
▶ Press ALT to leave Connect mode.
The easy800 device closes the mode automatically as soon as you have
moved the arrow to an occupied contact or coil field.
In the coil field change
I 01
Ä Q 01
2 x ú
OK
R
+ 3 x í + 2 x Ú
S
+ OK + OK
ä
È
è
Å
to
Ä Q 01 S Q 08
S 0Q 01 S 0Q 01
1 x í Ú
T 02
Q 03
S .
SN .
... .
08
S0Q 08
OK
ÍÚ