Eaton easy800 Manual page 319

SUMMERTIME START
DD.MM: 01.01
SUMMERTIME END
DD.MM: 01:01
SUMMERTIME START
SUMMERTIME END
ON LAST SU
OF MONTH 03
AT 02:00
DIFF: + 1:00
▶ Change to the MANUAL menu and press OK 2 x.
• Select the position with
• Change the value with
• Press OK to save day and time or press ESC to restore the previous
setting.
▶ Press ESC to leave the display.
▶ Select the day and the month on which the summer time is to start.
▶ Select the day and the month on which the summer time is to end.
On the easy800 device, the relevant time change in the subsequent years
always takes place on the selected days, for example each Sunday.
￫
On the changeover day, the following times apply:
Winter time ￫ summer time change: from 2:00 AM to 3:00 AM
Summer time ￫ winter time change: from 3:00 AM to 2:00 AM.
"EU", "GB" or "US" options
▶ Move to one of the EU, GB or US menus and press OK.
▶ Exit the menu with ESC.
The time setting is active and the easy800 device switches to the following
times according to these regional presets:
Rule option
￫
If you create a rule in the rule editor of the easySoft-Pro, you can
access the national time scenarios provided on a row. These
include possible worldwide time scenarios both for the northern
and for the southern hemisphere. In special cases you can
create your own special rules based on these.
▶ Change to the RULE menu and press OK.
▶ Choose SUMMERTIME START and press the OK button.
The flashing cursor is located in line 1, column 1 on the word ON.
▶ Press OK gain to move to Entry mode in order to set the changeover day
parameters for summer time.
▶ Use cursor buttons
▶ Position the cursor in succession with the
required entry locations and change the Weekday parameter (SO),
Month (OF xx. Month), Time (AT xx:xx) or the time difference (DIFF:) as
previously described for the changeover day.
▶ Press ESC to exit the SUMMER TIME START and choose
SUMMER TIME END.
▶ Set the changeover data to winter time as previously described for the
changeover day to summer time and exit the menu with ESC.
Control Relay easy800 11/11 MN04902001Z-EN www.eaton.com
ú í
.
ÍÚ
.
Í Ú
or to set day 1 to 4 or the last day and press OK.
8 800 Settings
8.5 Setting time
ú í ÍÚ
or buttons at the
315