Table of Contents
Advertisement
0 About This Manual
0.2 Target group
0.2 Target group
0.3 Exclusion of liability
8
Control Relay easy800 11/11 MN04902001Z-EN www.eaton.com
This operator manual is aimed at persons who wish to
•
develop an application with easy800.
•
test or commission an application developed with easy800.
•
maintain an application with easy800.
•
diagnose faults in an application with easy800.
A easy800 may only be fitted and connected by a qualified electrician or a
person who is familiar with electrical installations.
All information in this operator manual was provided by us to the best of our
knowledge and belief and in accordance with the current state-of-the-art.
However, this does not exclude the possibility of inaccuracies so that we
cannot accept any liability for the accuracy and completeness of the
information. This information in particular does not contain any guarantee for
the provision of specific properties.
The devices described must only be installed and operated in accordance
with the content of this operator manual and the installation instructions
provided with the device. Installation, commissioning, operation,
maintenance and refitting of the devices must only be carried out by qualified
persons. The devices must only be used in the areas recommended and only
in conjunction with third-party devices and components that have been
approved by us. Their use is allowed fundamentally only in technically
faultless condition. Fault-free and safe operation of the system requires
proper transport, storage, mounting and commissioning as well as careful
operation and maintenance.If the following safety instructions are not
observed, particularly with regard to commissioning and maintenance of the
devices by insufficiently qualified personnel and/or in the event of improper
use of the devices, any hazards caused by the devices cannot be excluded.
We cannot accept any liability for any resulting injury or damage.
The use of such sample programs and of the easySoft-Pro programming
software are subject to the following safety instructions and operating
guidelines:
1. The program examples provided were created to the best of our
knowledge and belief and in accordance with the current state-of-the-art. The
program examples provided were created to the best of our knowledge and
belief and in accordance with the current state-of-the-art. However, errors
cannot be totally excluded, and the example programs do not cover all
function blocks and applications that are available for the easy800 devices.
2. A specialist knowledge of electrical engineering is needed for the
programming and commissioning of easy800 devices. Plant sections and
persons are at risk if a easy800 device is incorrectly connected or configured
and active components such as motors or pressure cylinders are controlled.
Advertisement
Table of Contents
