Wiring Net Operands In The Circuit Diagram - Eaton easy800 Manual

4.5.16 Wiring NET operands in the circuit diagram

Circuit diagram:
I 01------Ä :01
I 02------Ä :02
: 01
--------u-Ä Q01
h-R Q02
----------Ä :08
: 02------Ä Q02
Q 02-I 03-T T02
T 02------Ä Q01
: 08
I 12 ------Ä D01
A NET with several stations always allows the reading of all inputs and
outputs. This is possible regardless of whether a circuit diagram is being
processed or not on the NET station to be read. The inputs and outputs are
addressed in the NET by using the preceding NET-ID of the station. The
inputs and outputs of a NET station are identified with nI.. and nQ, and its
local expansion unit with nR.. and nS...
The permissible access by stations to the inputs and outputs of other
stations depends on the operating mode of the devices on the NET, in which
the following applications are possible:
Operating devices on the NET
REMOTE IO mode; only NET station 1 processes a
circuit diagram.
All NET stations each process a circuit diagram.
Mixed operation of NET stations with and without a
circuit diagram.
n = NET-ID
For EASY806-DC-SWD, the device inputs and outputs I1-I4 and Q1-Q2
cannot be read nor written by other NET stations. REMOTE IO is always
deactivated. Other NET stations cannot access the stations of the SWD line.
Wiring a contact or coil of another NET station in the circuit diagram
Requirement: You must have selected an I.., R.., Q.., R.., RN.. S.. or SN..
operand in the circuit diagram and Entry mode must have been selected.
Control Relay easy800 11/11 MN04902001Z-EN www.eaton.com
Power flow display: I 01 selected:
I 01======Ä :01
I 02--------:01
: 01
=========uÄ Q01
hR Q02
==========Ä :08
: 02--------:08
Q 02--I 03--:08
T 02--------:08
: 08
I 12 -------Ä
D01
Usable NET operands of data type...
Bit
nI.., nR.., nQ.., nS...
nI.., nR.., nQ.., nS.., nRN..,
nSN...
nI.., nR.., nQ.., nS.., nRN..,
nSN...
4 Wiring with 800
4.5 Working with contacts and coils
Range from jump label 1 processed.
Jump to label 8.
Range to jump label 8 skipped.
Jump label 8, circuit diagram processed from
this point on.
32 Bit (DWord)
–
nPT.. and nGT...
nPT.. and nGT...
121