Linhai T-Boss 550 Service Manual page 97

CHAPTER 3 ENGINE
Check the shift fork clearance with a thickness
gauge in the groove of its gear.
Clearance exceeds the limit: → Replace
Shift fork to Groove clearance
Standard clearance :0.10-0.30mm
Service Limit :0. 50mm
Measure shift fork groove width with vernier caliper
Standard shift fork groove width: 6.05-6.15mm
Measure shift fork thickness with vernier calipers;
Standard fork thickness: 5.08-5.90mm
Check shift fork ① and ② for damage or bend
Damage, bend: → Replace
Install shift fork to guide bar and move left and right.
In case of any unsmooth moving, replace with a new
one.
T-Boss550 SERVICE MANUAL20.0
CHAPTER 3 ENGINE PAGE. 3- 72