Balancer Shaft Inspection; Magneto Rotor - Linhai T-Boss 550 Service Manual

CHAPTER 3 ENGINE
Balancer Shaft
Remove the parts as illustrated on the right. Check
each part for abnormal wear or damage.
Wear or damage: → Replace
① Balancer shaft gear
② Woodruff key
③ Balancer shaft
④ Balancer shaft sprocket
⑤ Washer
⑥ Bolt

Magneto Rotor

Remove starter clutch nut;
T-Boss550 SERVICE MANUAL20.0
CHAPTER 3 ENGINE PAGE. 3- 79