Connecting Rod - Linhai T-Boss 550 Service Manual

CHAPTER 3 ENGINE

Connecting Rod

Install connecting rod to left crankcase with special
tool;
Note:
Do not hammer the conrod into crankcase with
plastic mallet;
Use special tool to avoid affect of conrod precision
Tool: Conrod Installer
Balancer Shaft
Install balancer shaft
Caution: Balancer shaft driven gear should be aligned to
the mark as illustrated.
Main Shaft, Counter Shaft
Install main shaft and counter shaft.
T-Boss550 SERVICE MANUAL20.0
CHAPTER 3 ENGINE PAGE. 3- 85