Linhai T-Boss 550 Service Manual page 194

CHAPTER 5 FINAL DRIVE
NOTE: The PINION GEAR ASSY (A) AND
THE DIFFERERNTIAL ASSEMBLY ( B)
MUST BE REPLACED
SIMULTANEOUSLY,NOT SEPARATELY.
9.Remove the clutch gear (NO.25) from the
gearcase cover. →Fig 8
10.Inspect the shift lever (NO.43), shift level
spring (NO.42), shift return spring (NO.41), and
shift yoke (NO.45) for excessive wear or
damage. If disassembly is required proceed to
the next step. If no disassembly is required
Fig 7
Fig 8
T-Boss550 SERVICE MANUAL 20.0
proceed to "Rear Gearcase Assembly." →Fig 9
Fig 9
11.Loosen the lock shift pin (NO.46). →Fig 10
12.Remove the pin from the gearcase cover.
→Fig 11
CHAPTER 5
Fig 10
Fig 11
FINAL DRIVE. 5- 18