Rear A-Arm Replacement - Linhai T-Boss 550 Service Manual

CHAPTER 4 CHASSIS

4.2 REAR A-ARM REPLACEMENT

1. Carrier Bearing Wheel Rear Lh；2. Grease Fitting M6；
4. Circlip 63；
7. Shaft Pivot ,Upper；
10. Bushing,Short；
13. Shaft,Rear Upper Arm；
16. Arm Lwr Rear Lh；
19. Cover，Arm Lwr Rear Lh；
22. Bolt M10X1.25X62.5；
25. Ball Pin, Lh；
28. Bushing Stabilizer；
31. Arm Lwr Rear Lh Assy；
33. Carrier Bearing Wheel Rear Lh Assy
1. Elevate and safely support vehicle with weight
removed from the rear wheel(s).
2. Remove the wheel nuts and wheel.
NOTE: To ease the removal of the spindle bolt,
remove the hub cap and loosen the spindle bolts
before removing the wheel.
5. Shaft Pivot ,Lwr；
8. Bolt M10X1.25X90；
11. Arm Upper Rear Lh；
14. Scr Hxfl，Rear Upper Arm； 15. Square Rubber Plug
17. Plug；
20. Screw M5X10；
23. Bolt M10X1.25X57；
26. Ball Pin, Rh；
29. Bolt M8X20；
32. Arm Upper Rear Lh Assy；
T-Boss550 SERVICE MANUAL20.0
3. Bearing
6. Scr Hxfl,Rear Arm,Lwr
9.Nut M10
12. Bushing,Long
18. Shaft,Rear Lwr Arm
21. Rear Shock Absorber Assy
24. Stabilizer Bar
27. Bracket Stabilizer
30. Nut M8
CHAPTER 4 CHASSIS PAGE. 4- 4