Steering Assembly Removal/Installation - Linhai T-Boss 550 Service Manual

CHAPTER 4 CHASSIS

4.5 STEERING ASSEMBLY REMOVAL/INSTALLATION

1. Pin 2.5×25；
4. Steering Tie-Rod,Rh；
7. Bolt M8X90；
10. Steering Tie-Rod,Lh；
13. Steering Wheel Holder；
16. Steering Column Assy.；
19. Nut M12；
22. Nut M10；
25. Shoulder Bolt M8×1.25×30；26. Washer 6；
1. With the steering wheel cover bolts removed, remove the steering wheel cover and the
steering wheel.
2. With the steering wheel holder nut removed, remove the steering wheel holder.
3. Remove the steering column bolts.
4. Remove the upper of the steering column.
5. Remove the cotter pins and the tie rod end bolts (both sides).
6. With the cover bolts removed, remove the steering assy and the lower of the steering
column.
7. Reverse the procedure for installation.
2.Nut M10X1.25；
5. Steering Motor；
8. Bolt M8X20；
11. Steering Tie-Rod,Lh；
14. Steering Wheel Holder；
17. Washer 12；
20. Shoulder Bolt M10×1.25×30； 21. Bushing For Adjustable Steering Wheel
23. Nut M10；
T-Boss550 SERVICE MANUAL20.0
3. Steering Tie-Rod,Rh
6. Bolt M8X90
9. Nut M8
12. Steering Wheel
15. Screw M5X10
18. Washer Spring 12
24. Adjustment Cylinder
27. Bolt M6X12
CHAPTER 4 CHASSIS PAGE. 4- 9