Front Gearcase Disassembly - Linhai T-Boss 550 Service Manual

CHAPTER 5 FINAL DRIVE

5.19 FRONT GEARCASE DISASSEMBLY

Important: Before staring any operation
On the gearbox make sure GEAR MOTOR
(NO.36) is protected (if mounted). Never clean
the gearbox with a high pressure water jet.
→Fig 0.
Fig 0
1. Remove the DRAIN BOLT (NO.13) and let the
oil drain from the gearbox.
Important: Clean the plug carefully and
Replace WASHER 10 (NO.14) before
Its assembled. →Fig 1.
Fig 1
2. Remove the NUT (NO.1) and the washer
(NO.2).
→Fig 2
.
T-Boss550 SERVICE MANUAL 20.0
Fig 2
3. Remove the O-RING (NO.3) .
→Fig 3.
Fig 3
4. Remove the COUPLER (NO.4).
→Fig 4.
Fig 4
CHAPTER 5 FINAL DRIVE. 5- 24