Install Thermostat; Camshaft - Linhai T-Boss 550 Service Manual

CHAPTER 3 ENGINE

Install thermostat

Install thermostat cover
Install water temperature sensor, apply thread
locker to the thread part, tighten it to the
specified torque.
Water temperature sensor
Tightening torque: 10 N· m
Install intake pipe, apply lubricant to 0-ring.

Camshaft

Check camshaft for wear and run-out of cams and
journals if the engines produces abnormal noise or
vibration or lacks power output. Any of these symptoms
could be caused by wear of camshaft.
Note: Do not try to disassemble the camshaft/automatic
decompression assembly. It is not serviceable.
T-Boss550 SERVICE MANUAL20.0
CHAPTER 3 ENGINE PAGE. 3- 54