CHAPTER 3 ENGINE
Tighten the ring nut with special tool to the specified
torque.
Ring Nut Tightening Torque: 100N· m
Tool: Ring nut wrench
Sheave Holder
Drive belt
Check belt for any greasy substance.
Check contact surface of belt for any cracks and
damage.
Check belt width with vernier caliper.
Damage, width out of range: →Replace
Belt width service limit: 33.5mm
Tool: vernier caliper
Caution:
If belt surface is stained with grease or oil, degrease the
belt thoroughly.
T-Boss550 SERVICE MANUAL20.0
CHAPTER 3 ENGINE
PAGE. 3- 69