Linhai T-Boss 550 Service Manual page 207

CHAPTER 5 FINAL DRIVE
11.Assemble the gearcase halves and install
the bolts (NO.29) that secure the cover to the
housing. Torque the bolts in a criss cross
pattern to 20~25Nm. →Fig 11
Fig 11
12. Mount the gear motor A.
Important: Before assemble the gear motor
(NO.36), make sure that the shift fork (NO.39) is
in their correct position as shown.
→Fig 12.
Fig 10
T-Boss550 SERVICE MANUAL 20.0
Fig 12
13. Mount the four screws (NO.37) .
→Fig 13.
CHAPTER 5
Fig 13
FINAL DRIVE. 5- 31