Engine Removal, Inspection & Installation - Linhai T-Boss 550 Service Manual

CHAPTER 3 ENGINE
Ⅰ
3.4. Engine Removal, Inspection & Installation
Engine Removal
Δ Preparation before engine removal
Prepare a proper tray used for load of components
Prepare necessary removal and assembly tools
Drain up engine oil
Drain up coolant
△
Engine Periphery
Water Hose/Pipe
Remove water hose clamp① and②;
Remove water hose③
Remove screw④ and water hose⑤
Left Side Cover
Remove 4 bolts (M6X12) of left side cover
Remove left side cover
Inspection Plug
Remove inspection plug⑥ with screwdriver
Δ Engine Front Side
Spark Plug
Remove spark plug⑦ with special wrench
Tool: Spark Plug Wrench
Turn crankshaft, align T.D.C. line A on magneto rotor
with mark B of left crankcase
T-Boss550 SERVICE MANUAL20.0
CHAPTER 3 ENGINE PAGE. 3- 35