Chain Tensioner - Linhai T-Boss 550 Service Manual

CHAPTER 3 ENGINE
T-Boss550 SERVICE MANUAL20.0
Gasket Sealant Applying Place

Chain Tensioner

Insert (--) screwdriver into slotted end of chain
tension adjuster, turn it clockwise to lock the
tensioner spring;
Install the chain tensioner and the new washer (1);
Install the bolt (2), tighten it to the specified torque;
Chain tensioner bolt tightening torque: 10 N· m
After chain tensioner is installed, turn the (--)
screwdriver counter clockwise. The tensioner rod
will be advanced under spring force and push
tensioner against chain.
CHAPTER 3 ENGINE PAGE. 3- 98