Linhai T-Boss 550 Service Manual page 142

CHAPTER 3 ENGINE
● Never test electrical signals that exceed the limit of specifications.
● Test cannot be performed by the person who is driving the car.
● This unit should be used and stored in the following conditions:
Ambient temperature: 0~50℃
Relative humidity: <90%
3.5.9.2 Configurations
Delphi Motor scanner consists of 2 main part: the main units (with diagnostic main cable) and
diagnostic connector link (one end is 6PIN connector; the other is the interface for connecting
diagnostic main cable). They are shown as below:
Delphi Motor scanner
S
A: Main Unit
B: Diagnostic Main Cable
C: Diagnostic Connector Link
The 6 PIN diagnostic connector link cable and USB type main unit's software update cable
are in the delivered package.
3.5.9.3 Preparations Connection
● Find the 6PIN diagnostic socket on the motor.
● Connect one end of the diagnostic main cable to the main unit, and the other end to
diagnostic socket on the motor, tighten the screws.
Normal Power – on Display
When power is on normally, the unit will display:
T-Boss550 SERVICE MANUAL20.0
Outline of Main Unit
CHAPTER 3 ENGINE PAGE. 3- 117