Assembly And Installation Of Water Pump - Linhai T-Boss 550 Service Manual

CHAPTER 3 ENGINE
Oil Seal
Check oil seal for damage. Pay special attention to
the oil seal lip;
In case of damage or leakage, replace the oil seal;
Water Pump Body
Check the mating mace of water pump body with
bearing and mechanical seal.
Damage: →Replace
Impeller
Check the impeller and shaft for damage.
Damage: →Replace

3.6.7.3 Assembly and Installation of Water Pump

Install oil seal with special tool;
Tool: Oil Seal Installer
Note: The stamped mark on the oil seal faces outside
Apply a little grease to the oil seal lip.
T-Boss550 SERVICE MANUAL20.0
CHAPTER 3 ENGINE PAGE. 3- 131