Clutch Check - Linhai T-Boss 550 Service Manual

CHAPTER 3 ENGINE
Clutch
Clutch Shoes
Check clutch for chipping, scrape, uneven wear or
heat discoloration. At the same time check depth of
the grooves of clutch shoes. If any of the clutch
shoes has no groove, replace the clutch.
Note: clutch should be replaced as a set.
Clutch Wheel
Check the inner clutch wheel ① for scratches, scuffs or
blue discoloration or uneven wear. If any damage is
found, replace the clutch wheel with a new one.
Check oil seal lip for wear or damage.
Wear or Damage: →Replace
Use special tool to remove oil seal
Tool: Oil seal remover
Use special tool to assemble oil seal
Tool: Oil seal installer set
Check the turning of bearing.
Abnormal damage: →Replace
Assembly
Apply lubricant grease to oil seal when assembling.
T-Boss550 SERVICE MANUAL20.0
CHAPTER 3 ENGINE PAGE. 3- 61