CHAPTER 7 ELECTRICAL
T-Boss550 SERVICE MANUAL 20.0
7.9
SPEEDMETER SYSTEM
OPERATION OF SPPED SENSOR
Speed Sensor is on the gearbox
This sensor is used to detect the rotating speed of the engine output shaft and provide
the signal for ECU and speedometer to determine the vehicle speed. It belongs to Hall
effect sensor,that varies its output voltage in response to a magnetic f ield.
1. Ground
2. Output voltage signal
3. Power DC 12V(+)
The following figure refers to speed sensor wiring
CHAPTER 7 ELECTRICAL CTRICAL PAGE 7- 27