Tire Pressure; Frame, Nuts, Bolts, Fasteners; Tire Inspection; Tire Tread Depth - Linhai T-Boss 550 Service Manual

CHAPTER 2 MAINTENANCE

2.9 TIRE PRESSURE

TIRE INSPECTION

CAUTION:
 Maintain proper tire pressure. Refer to the
warning tire pressure decal applied to the
vehicle.
 Improper
tire
maneuverability.
 When replacing a tire always use original
equipment size and type and replace in pairs,
especially in 4X4 model.
 The use of non- standard size or type tires may affect
UTV handling and cause machine damage, especially
in 4X4 model.

TIRE TREAD DEPTH

Always replace tires when tread depth is worn to 1/8"
(3mm ) or less.
Operating an UTV with worn tires will increase the
possibility of the vehicle skidding easily with possible
loss of control.
Worn tires can cause an accident.
Always replace tires when the tread depth measures
1/8" (3mm ) or less.
3.0 FRAME , NUTS, BOLTS, FASTENERS
Periodically inspect the tightness of all fasteners in
accordance with the maintenance schedule. Check that
all cotter pins are in place. Refer to specific fastener
torques listed in each chapter.
inflation may affect
T-Boss550 SERVICE MANUAL 20.0
Tire Pressure Inspection
UTV
Front
see detail on the
mark of sidewall
CHAPTER 2
Rear
see detail on the
mark of sidewall
MAINTENANCE PAGE. 2- 13