YASKAWA Motoman NX100 Manual page 23

HW0481994
2.1.1
Using a Crane
As a rule, when removing the manipulator from the package and moving it, a crane should be
used. The manipulator should be lifted using wire rope threaded through shipping bolts and
brackets. Be sure the manipulator is fixed with the shipping bolts and brackets before trans-
porting, and lift it in the posture as shown in " Fig. 2 Transporting Position ".
Details of shipping bolt Rubber plate
Electrical tape
painted in yellow
A
Fig. 2 Transporting Position
2-2
2.1 Transporting Method
Shipping bolt Shipping bolt
B
(1 piece) (1 piece)
Shipping bracket Shipping bracket Shipping bracket
(4 pieces) (4 pieces) (4 pieces)
Hook
13/76