YASKAWA Motoman NX100 Manual page 24

2.2 Shipping Bolts and Brackets
2.2
Shipping Bolts and Brackets
The manipulator is provided with shipping bolts and brackets at position A and with the hexa-
gon socket head cap screws at point B. (" Fig. 2 Transporting Position ").
A
Shipping bracket
Hook
• The A-shipping brackets are painted in yellow.
• The B-shipping bolt: hexagon socket head cap screw is taped in yellow. .
Position
A
B
Before turning ON the power, check to be sure that the shipping bolts and brackets have
NOTE
been removed. The shipping bolts and brackets then must be stored for future use, in the
event that the robot must be moved again.
Fig. 3 Shipping Bolts and Brackets
Bolt Type
Hexagon socket head cap screw M20 X 70 mm
Hexagon socket head cap screw M16 X 20 mm
2-3
B
Shipping bolt
Rubber plate
Electrical tape painted
in yellow
HW0481994
Pcs
12
1
14/76