Cleaning The Mirrors - Trotec Speedy 400 Operating Manual

Notice
Trotec Laser GmbH recommends to use the following cleaning products, which are available as accessory
parts:
Lens cleaning cloth (part number 69249) and lens cleaning liquid (part number 69248).
8.4.4

Cleaning the mirrors

Caution
Make sure that you do not touch the mirror with your fingers, since this would greatly reduce the service
life of the mirror.
Do not touch the mirror with your fingers or with tools, and never use a cleaning tissue twice, as the
surface could easily be scratched.
CLEANING THE MIRRORS #2 AND #3
SpiMirror #3
1. For cleaning of mirrors #2 and #3, you must first remove the right maintenance
panel.
2. Do not remove the mirror #2. It must remain in the machine for cleaning.
3. The mirror #3 is attached by means of two Allen screws (1), which are located
on the mirror holder. Open the screws and remove the lens holder together
with the mirror.
Do not touch the milled screws (2) while doing this!
4. Flush the mirror with cleaning liquid to wash away coarse soiling.
5. Put some cleaning liquid onto the mirror and leave the liquid for 1 minute to
take effect.
6. Soak a cleaning tissue with cleaning liquid and carefully wipe off the surface.
7. Now carefully put back the mirror and fixate it with the two Allen screws.
Maintenance
73