1. Manuals
  2. Brands
  3. Trotec Manuals
  4. Printer
  5. Speedy 360 flexx
  6. Operation manual

Trotec Speedy 360 flexx Operation Manual

Hide thumbs Also See for Speedy 360 flexx:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual
Speedy 360 flexx
Operation Manual
BA 8032_2.2_EN (05/2016)
ENGLISH
www.troteclaser.com

Advertisement

Table of Contents
loading

Related Manuals for Trotec Speedy 360 flexx

Summary of Contents for Trotec Speedy 360 flexx

  • Page 1 Speedy 360 flexx Operation Manual BA 8032_2.2_EN (05/2016) ENGLISH www.troteclaser.com...
  • Page 2  Copyright This documentation with all illustrations is intellectual property of Trotec Laser GmbH. The entire documentation is given to the user for personal use only. Reproduction, translation or any distribution to third parties is not permitted without the prior consent of Trotec Laser GmbH. Any infringement will be prosecuted.

  • Page 3: Table Of Contents

    Speedy 360 Contents 1 General .............................. 6 1.1 Information about this operation manual ..................6 1.1.1 Storage of the manual ...................... 6 1.1.2 Complementary documentation ..................6 1.2 Explanation of symbols ....................... 7 1.3 Liability and warranty ........................8 1.4 Scope of delivery (standard configuration) ................. 9 1.5 Type plate ..........................
  • Page 4 7.3 Setup............................54 7.4 Connections ..........................55 7.4.1 Connecting the mains ..................... 56 7.4.2 Connecting the PC ......................56 7.4.3 Connecting a Trotec exhaust system ................57 8 Operation ............................58 8.1 Before operation ........................58 8.2 Software ............................ 58 8.3 Power ON/OFF .........................
  • Page 5 Speedy 360 8.8.3 Engraving ........................71 8.9 Tips and tricks ........................... 72 8.9.1 Tips and tricks for laser engraving ................. 72 8.9.2 Tips and tricks for laser cutting ..................73 8.9.3 Tips and tricks for the production of rubber dies ............73 9 Maintenance ............................

  • Page 6: General

    This manual is an integral part of the machine and must therefore be kept in the direct vicinity of the machine and be accessible at all times. 1.1.2 Complementary documentation Software Operation Manual ® Trotec JobControl JobControl_Operationmanual_x.x.x_Vx.x www.troteclaser.com BA 8032_2.2_EN (05/2016) 6 / 90...

  • Page 7: Explanation Of Symbols

    Speedy 360 Explanation of symbols Important technical safety notes and instructions in this manual are marked with symbols. These instructions for workplace safety must be complies with and followed. Here special attention must be paid in order to avoid accidents, injury to persons or material damage. DANGER This symbol indicates information noncompliance wherewith result in death or serious injury.

  • Page 8: Liability And Warranty

    Furthermore, Trotec Laser GmbH shall accept no liability whatsoever for damage caused by the use of non-original parts and accessories. Any software forming part of this equipment may be used only for the purposes for which it was supplied by Trotec Laser GmbH.

  • Page 9: Scope Of Delivery (Standard Configuration)

    Speedy 360 Scope of delivery (standard configuration) 1. Laser machine 2. DVD (with laser software, printer driver and operation manuals) 3. Focusing tool(s) (according to lens order) 4. Cleaning kit for optics 5. Nozzles (2 pcs.: ø3 und ø7) 6. Lens (standard lens for CO : 2”, fiber: 3.2”, flexx: 2.85”...

  • Page 10: Type Plate

    Speedy 360 Type plate The type plate with the CE mark is located on the rear of the machine. Enter the serial number, model and year of manufacture into your manual and always refer to them when contacting our representative or service office for enquiries, troubleshooting or ordering of replacement parts.

  • Page 11: Safety

    Use of the machine for any purposes other than those intended or described in the present manual is regarded as improper and therefore prohibited. Trotec will not accept any liability for damage caused by improper use. The risks in case of improper use are exclusively borne by the user.

  • Page 12: Safety Norms And Regulations

    Speedy 360 2.1.3 Safety norms and regulations The following directives and guidelines must be observed to avoid hazards when operating Trotec laser systems: EN 60825-1 Safety of Laser Products - Part 1: Equipment Classification and Requirements Information Technology Equipment – Safety...

  • Page 13: Laser Safety

    Laser safety The laser safety class indicates the risk potential from accessible laser radiation. The Speedy 360 flexx is a Class 2 (US: Class II) laser marking system as per DIN EN 60825-1 “Safety of Laser Products”. The integrated laser source of the Speedy 360 flexx is a Class 4 (US: Class IV) laser marking system according to DIN EN 60825-1 and identified as such.

  • Page 14: Machine Modification

    Speedy 360 Machine modification It is strictly prohibited to alter, refit or modify the machine in any way without the express consent of the manufacturer. Likewise, it is strictly prohibited to remove, bridge or bypass any safety devices. Operating conditions and connection and setup values stated in the data sheet must be complied with at all times.

  • Page 15: Area Of Responsibility

    Speedy 360 Area of responsibility 2.4.1 Responsibilities of the operator In addition to the safety notes and instructions stated in this manual, consider and observe the local accident prevention regulations and general safety regulations that apply at the operation site of the machine. If the machine is used industrially, the operator is subject to the legal obligations concerning industrial safety.

  • Page 16: Responsibilities Of The Operating Personnel

    Control/ operation/ other Qualified Qualified personnel are those who can activities personnel or judge the work entrusted to them and Trotec detect potential risks based on their (e.g. troubleshooting, technicians occupational training, knowledge and maintenance) experience as well as their understanding of the relevant regulations.

  • Page 17: Warning And Information Labels

    If any warning and information labels are lost or damaged, the user is not able identify risks anymore, and there is danger of injury. - Replace lost or damaged labels immediately. - Please contact your Trotec dealer for details. P = xxx W www.troteclaser.com BA 8032_2.2_EN (05/2016)
  • Page 18 Speedy 360 P = xxx W www.troteclaser.com BA 8032_2.2_EN (05/2016) 18 / 90...

  • Page 19: Safety Devices

    In case of assumed or presumed damage of safety devices, disconnect the machine from the mains.  Damaged safety and protection devices need to be replaced by a Trotec technician immediately. The machine is equipped with the following safety devices:...

  • Page 20: Main Switch

    Speedy 360 2.7.1 Main switch The main switch disconnects the machine from the mains power supply. 2.7.2 Key switch Turning the key switch powers off the motor, laser source and electric system. Through the key switch, operation by non-authorized personnel can be prevented. 2.7.3 Temperature sensor reset button (option) The temperature sensors ensure reliable temperature monitoring of the interior of the machine and are...

  • Page 21: Emergency Stop Button (Only With Temperature Sensor Option)

    Speedy 360 2.7.4 Emergency stop button (only with temperature sensor option) The emergency stop button, which is located above the operation panel, is present only if the machine is equipped with an optional temperature sensor. When pressing an emergency stop button, the electric circuit immediately shuts off. The laser beam is interrupted, and all movements are stopped The function of the emergency stop device is: Firstly:...

  • Page 22: In Case Of Safety Device Malfunction

    Inform laser protection officer and supervisor.  Follow the operating instructions.  Have repair work performed by Trotec service technicians only.  In case of fire: Use only CO extinguisher to quench the fire, insofar as this is possible without endangering yourself.

  • Page 23: Specific Hazards

    Speedy 360 Specific hazards 2.9.1 Fire hazard WARNING Fire hazard Fire hazard from gas and processing of inflammable materials. - Do not operate the device without supervision. - Keep CO fire extinguisher ready at hand in the immediate vicinity of the device.

  • Page 24: Optical Components

    Speedy 360 2.9.3 Optical components WARNING Zinc selenide lens, telescope and laser exit window Soiled optics absorb laser radiation and can thus be destroyed. Broken or damaged lenses release particles which cause serious damage to the health. Special care is required when handling, attaching and cleaning these elements. Do not exert non-uniform pressure.
  • Page 25 Speedy 360 2.9.3.4 Protective measures Protective measures in case of thermal decomposition and scratched or broken lenses For disposal use a protective mask or respiratory filter to prevent inhalation or ingestion of thorium. Wash hands thoroughly after contact with a scratched coating. Protective measures in case of a broken lens Upon perception of an unpleasant odor, switch off the machine.

  • Page 26: Ec Declaration Of Conformity

    Trotec Laser GmbH Linzer Straße 156 A-4600 Wels Authorized person for the compilation of technical documentation Gerhard KREMPL, Trotec Laser GmbH., Linzer Straße 156, A-4600 Wels We hereby certify that SPEEDY 360 flexx Modell N° 8032 Speedy 360 flexx in its conception, construction and form put by us into circulation is in accordance with all the relevant essential health and safety requirements of the EC machinery directive 2006/42/EEC.

  • Page 27: Technical Data

    Speedy 360 Technical Data Dimensions and weight Item Description Dimension Units Length 1221 (48) mm (inch) Width* 830 (32,67) / 790 (32.8)* mm (inch) Height, closed with base frame 1055 (41.55) mm (inch) Height, open 1750 (68.89) mm (inch) * without exhaust hose connectors on the back and with the top lid open Weight –...

  • Page 28: Data Sheet

    Speedy 360 Data sheet • Mechanics 32  20 in (813  508 mm) 4.2.1.1.1.1.1 Working area 4.2.1.1.1.1.2 35  23.6 in (890  600 mm) 4.2.1.1.1.1.3 Loading area 4.2.1.1.1.1.4 4.2.1.1.1.1.5 Max. height of work piece 1.5 ", 2.0 ": 8.2 in (210 mm) incl. working table / 11 in (280 mm) without working table 2.0 "...
  • Page 29 Speedy 360 4.2.1.1.1.1.39 4.2.1.1.1.1.40 • Options 4.2.1.1.1.1.41 4.2.1.1.1.1.42 Rotary attachment Cone, roll or combined version, tiltable Max. workpiece length cones: 21.6 in (550 mm) Max. workpiece length rolls: Ø ≥ 2.2 in (58 mm) = 26.7 in (679 mm), Ø ≤ 2.2 in (58 mm) = 29.3 in (745 mm) Max.
  • Page 30 Speedy 360 4.2.1.1.1.1.65 • Dimensions 4.2.1.1.1.1.66 48  32.8 (30.7*)  41.5 in (1221  830 (790*)  1055 mm) Width/depth/height * without exhaust hose connection on the back of the machine and open top lid Approx. 595 - 628 lbs (ca. 270 - 285 kg) – depending on laser power Weight Ambient conditions Mandatory ambient temperature +15°...

  • Page 31: Electrical Requirements

    Speedy 360 Electrical requirements Laser Power 35–50 W (CO 55–80 W (CO 85–100 W 105–120 W 10-50 W (fiber) 10-50 W (fiber) 10-50 W 10-50 W (fiber) (fiber) Voltage 230VAC 115VAC 230VAC 115VAC 230VAC 230VAC Fuse 16AT 10AT 16AT 12AT 12AT Power consumption 1200 W...

  • Page 32: Exhaust System Requirements

    The laser may be operated only with properly installed and operating exhaust system. Depending on the type of table installed in the machine, the exhaust requirements and recommended Trotec exhaust systems for standard applications are: Atmos Hose...

  • Page 33: Computer Requirements

    Speedy 360 Computer requirements When using a more powerful computer, the graphics are generated and displayed faster, and the computing times and the times for data transfer to the laser are reduced. The following recommendation represents the minimum requirements.  Operating systems ®...

  • Page 34: Materials

    Speedy 360 Materials Material Cutting Engraving Marking Fiber Flexx CO Fiber Flexx CO Fiber Flexx Metal Aluminum √ √ √ √ √ √ √ √ √ Aluminum, anodized Chromium √ √ √ √ √ √ √ √ Precious metals √ √...

  • Page 35: Speedy

    - Only use approved and released materials. We recommend performing a material processing test with the above mentioned material, using the appropriate configuration. Trotec assumes no responsibility for any consequences of laser processing in any application, especially with medical or pharmaceutical applications. www.troteclaser.com BA 8032_2.2_EN (05/2016)

  • Page 36: Machine Overview

    Speedy 360 Machine overview General overview Description Description Acrylic top lid Side panel left Service plug connector Cover for laser tube and power supplies Laser head Connector for exhaust tube Interlock safety switch USB port for PC Connector for rotary attachment RS 232 port for PC X axis Connectors for exhaust cable...

  • Page 37: Operation Panel

    Speedy 360 5.1.1 Operation panel 1.Status indicator: Laser beam 6. Button: Stop LED ON: The machine is processing or receiving data 7. Button: Start/Pause/Repeat LED ON: Pause Button: Standby Pressing the button after job completion LED ON: Standby Mode will start repetition LED OFF: Ready Mode 3 Button: Home LED ON: Home position...
  • Page 38 Speedy 360 Button: Press the button to manually move the working table up or down. Z position working Press Shift together with one of the Z position keys to move the table laser head to the corresponding end position. The Z axis movement can be stopped by pressing any of the Z axis keys.
  • Page 39 Speedy 360 For second operating level. Press the button together with any of Button: Shift the following keys to activate the following functions: Shift functions: Shift + Exhaust Air assist on/off Shift + Z position working Laser head moves quickly to table corresponding end position Shift + Standby...
  • Page 40 Speedy 360 5.1.1.1 Keyboard shortcuts Shortcuts Shift + Exhaust Air assist on/off Laser head moves quickly to Shift + X/Y position laser head corresponding end position Shift + Standby Keypad locked/unlocked LED interior illumination on/off Shift + Stop Work table moves up to autofocus- Shift + Z position working table "UP"...

  • Page 41: Front Door

    Speedy 360 5.1.1.2 Keyboard shortcuts only for flexx machines Shortcuts 1. Standby Switch laser source manually into 2. X position laser head + X position laser mode head 1. Standby Switch laser source manually into 2. Y position laser head + Y position laser fiber mode head 5.1.2...

  • Page 42: Tables (Multifunctional Table Concept)

    Speedy 360 Tables (multifunctional table concept) 5.2.1 Multifunctional base frame The multifunctional base frame is bolted to the mounting frame, which is attached to the Z axis. All table variants rest on the base frame. With the exception of the ferromagnetic engraving table which may also be placed directly on the mounting frame if there is no base frame present.

  • Page 43: Cutting Tables

    Speedy 360 5.2.4 Cutting tables 5.2.4.1 Aluminum slat cutting table The cutting table with aluminum slats is ideal for cutting thicker materials (8 mm thickness and above) and for parts wider than 100 mm. The slats can be arranged individually, consequently the table can be adjusted to each individual application.

  • Page 44: Additional Tabletops

    Speedy 360 5.2.4.3 Aluminum cutting grid table This robust cutting table offers excellent stability and is particularly suitable for cutting tasks with parts smaller than 100 mm, as these remain in a flat position after the cutting. 5.2.4.4 Acrylic cutting grid table The special acrylic grid prevents reflection during cutting.

  • Page 45: Lenses And Nozzles

    Speedy 360 Lenses and nozzles Lenses (incl. focus tool) available: Fiber Flexx Part No. Teilenr. Teilenr. 85973 1380 9567 1.5”, red 3.2" 2.85" gold green (Standard) Part No. Teilenr 85974 37781 2.0”, black 5.0" (standard) light blue Part No. 95909 2.0”...

  • Page 46: Transport, Packaging And Storage

    Speedy 360 Transport, packaging and storage Safety notes WARNING Risk of injury There is risk of injury from falling parts during transport, loading and unloading of the machine. - Follow the safety instructions. Observe the safety instructions to avoid damage to the machine from improper handling during transport: ...

  • Page 47: Transport Conditions

    Speedy 360 6.2.2 Transport conditions Transport the machine and its components only under the flowing conditions:  Transport conditions: Ambient temperature for transportation -10 °C to 40 °C (-50 °F to 104 °F) Humidity max. 85% (non-condensing)  Observe the packaging symbols: Symbols Meaning according to ISO/DIN keep dry...

  • Page 48: Storage And Storage Conditions

    Speedy 360 Storage and storage conditions Store packed items only under the following conditions: 1. Storage conditions: Storage temperature: +0 °C to 30 °C (32 °F to 86 °F) Relative humidity: max. 60% 2. Keep the machine sealed in its packaging until it is assembled/installed. 3.

  • Page 49: Unpacking The Machine

    Speedy 360 Unpacking the machine Only trained and authorized personnel are permitted to transport and unpack the machine. To avoid falling off of any wooden parts or tipping of the machine, be very careful when opening the transport case. Keep the original packaging case, in case the machine needs to be relocated or transported over longer distances.
  • Page 50 Speedy 360 6. Now insert the two rails to form ramps. (For this you will require min. 2 persons.) 7. Now roll the machine slowly down the ramps. www.troteclaser.com BA 8032_2.2_EN (05/2016) 50 / 90...

  • Page 51: Transport Inspection And Reporting Of Defects

    Speedy 360 Transport inspection and reporting of defects Upon receipt, immediately inspect the delivery to ensure that it is complete and has not suffered any damage. If any transport damage is visible, do not accept the delivery, or accept it only with reservation.

  • Page 52: Setup And Installation

    Speedy 360 Setup and installation Safety notes WARNING Improper assembly or setup can cause serious injury or damage. For this reason, this work may be carried out only by authorized, trained personnel who are familiar with how to operate the machine and in strict observance of all safety instructions. An incomplete, faulty or damaged machine can lead to serious physical injury or property damage.

  • Page 53: Operating Environment

    Speedy 360 Operating environment Installation side requirements:  Operating conditions: Operating temperature: +15 °C to 25 °C (59 °F to 77 °F) 40% – 70% (non-condensing) Air humidity:  Provide sufficient illumination at the workplace.  Ensure a dust-free environment (II° according to IEC60947-1) ...

  • Page 54: Space Requirements

    Speedy 360 7.2.1 Space requirements Ensure there is shielding or sufficient clearance to or from the wall and neighboring objects. Setup Observe the following steps: 1. Transport the machine to the installation location according to the specifications stated in the chapter “Transport”.

  • Page 55: Connections

    Speedy 360 Connections Install the connections exactly in the order described, otherwise electrostatic charging can damage your computer and/or the electronics of the laser system. Description Description USB port for PC Main socket RS 232 port for PC Fuse Connector for exhaust connection cable JobControl ®...

  • Page 56: Connecting The Mains

    Speedy 360 7.4.1 Connecting the mains Connect one end of the mains cable to the main connection socket (5) at the rear side of the laser device and the other end to a protected power outlet. INPUT POWER WARNING 220-240VAC 50HZ Mains voltage and operating voltage must match (AC 230 V/50 Hz or AC 115 V/60 Hz) –...

  • Page 57: Connecting A Trotec Exhaust System

    The position of the connector depends on the type of the exhaust system. 3. When using an original Trotec exhaust system, also connect this, using the exhaust connection cable included, to the exhaust cable connection on the laser.

  • Page 58: Operation

    Speedy 360 Operation Improper operation may lead to severe physical injury or property damage. For this reason, work may be carried out only by authorized, trained personnel who are familiar with how to operate the machine and in strict observance of all safety instructions. Before operation Before commissioning, the following points need to be checked: ...

  • Page 59: Power On/Off

    Speedy 360 Power ON/OFF 8.3.1 Power ON 1. Ensure that no objects of any kind are present inside the processing area that could limit or obstruct the freedom of movement of the mechanics of the device. 2. Ensure that all safety protection covers are fully functional and closed (acrylic top lid, front door, side panel).

  • Page 60: Table Placement

    Speedy 360 Table placement 1. Place a suitable table on the multifunctional base frame. 2. Fixate the table by pressing the push buttons. All table variants rest on the base frame. However the ferromagnetic engraving table may also be placed directly on the mounting frame without the base frame.

  • Page 61: Lens Placement

    Speedy 360 Lens placement 1. Loosen lens (1) by turning the clamping ring inward (2) 2. Remove lens (1) 3. Check lens (1) for damage 4. If necessary, clean both sides of the lens (1) with cleaning liquid and cleaning tissue (see chapter “Cleaning the lens”) 5.

  • Page 62: Switch Laser Source Manually

    Speedy 360 Switch laser source manually The switch between the CO and fiber laser source is performed either manually by pressing a shortcut on the operation panel or as result of JobControl ® software settings. Procedure to which between the CO and fiber laser source manually: 1) After referencing of the 2a) CO...

  • Page 63: Focusing Methods

    Speedy 360 Focusing methods Precise laser engraving depends on several factors. Apart from the right choice of lens, working tables and a corresponding exhaust system, correct focusing plays a key role. The correct setting of the focus, which means the right distance between the laser head and the material to be engraved, is crucial for a perfect application result.

  • Page 64: Focus Tool

    Speedy 360 8.7.1 Focus tool 1. Move the processing head over the material to be engraved by means of the X/Y position keys (2) on the keypad. 2. Hang the focus tool (3) corresponding to the lense on the external ring of the laser head so that the focus tool can move unhindered.

  • Page 65: Software Focus

    Speedy 360 8.7.2 Software focus ® The following values must be entered in JobControl , as they are necessary for the software to calculate the focus position:  Table type  Lens type  Material thickness (exact measurement)  Material process type The values entered must match the material, table and lens in the machine in order to avoid a head crash.
  • Page 66 Speedy 360 8.7.2.1 Software focus (flexx lens) Using a flexx lens the focus point differs depending on the laser source. When carrying out a software focus, JobControl ® is going to switch to the right laser source and adjusts the focus point difference automatically as soon the lens type and processing type per laser ®...

  • Page 67: Light Bar Focus

    Speedy 360 8.7.3 Light bar focus 1. Make sure that the lens that is installed in the laser head is selected in the JobControl ® software. 2. Press the two keys for Z positioning (1) simultaneously for the table to move up. 3.

  • Page 68: Rotary Engraving Attachment (Option)

    Speedy 360 Rotary engraving attachment (option) The rotary engraving attachment is used to engrave cylindrical workpieces. Upon selection of the option “Rotary Engraving Attachment” in the JobControl ® software and entering the diameter of the object to be engraved, the image size will automatically be automatically adjusted to the diameter of the workpiece to be processed.

  • Page 69: Installation And Commissioning

    Speedy 360 8.8.1 Installation and commissioning 1. A working table must be mounted and positioned at the lowest position. The laser machine must be switched off. 2. Place the rotary attachment onto the working table using the existing insertion handles. 3.

  • Page 70: Mounting The Work Piece

    Speedy 360 8.8.2 Mounting the work piece 1. Measure the diameter of the workpiece. 2. Adjust the height and angle of the system by loosening and fixing the levers. Levers for fixation of height and angle 3. Loosen the slider by using the lever in order to clamp the workpiece between the two cones or rolls.

  • Page 71: Engraving

    Speedy 360 8.8.3 Engraving 1. Create a graphic with the help of the graphics software. Select the printer driver and rotary attachment, and enter the diameter of the workpiece. menu “Plate” > “Setup Plate” and ® 2. Perform the settings for size and orientation in the JobControl choose - if necessary - the engraving material.

  • Page 72: Tips And Tricks

    Speedy 360 Tips and tricks 8.9.1 Tips and tricks for laser engraving The engraving depth can be varied by varying laser power or engraving speed. To increase the engraving depth, reduce the speed or increase the power setting; thereby you increase the energy input per area unit.

  • Page 73: Tips And Tricks For Laser Cutting

    Furthermore, the entire plate can be removed from the laser at one time instead of having to collect all dies individually. Engraving rubber produces a considerable amount of dust. Therefore a well-dimensioned exhaust system and its regular maintenance are very important. An appropriate Trotec exhaust system is recommended. www.troteclaser.com BA 8032_2.2_EN (05/2016)

  • Page 74: Maintenance

    Speedy 360 Maintenance Safety notes DANGER Improper maintenance can cause serious injury or damage. Maintenance may be carried out only by authorized, trained personnel who are familiar with how to operate the machine and in strict observance of all safety instructions. DANGER Risk of fire or explosion Improper handling of the machine may cause fire or explosion.

  • Page 75: Maintenance Schedule

    Speedy 360 Maintenance schedule System Components Daily Weekly Monthly Yearly Laser Lens, mirror #4 Check Clean whenever required Mirrors #2 and #3 Every 6 month: Check Clean whenever required Ultrasonic sensor Check (Option) Clean whenever required Working table and Check rulers Clean whenever...

  • Page 76: Cleaning The Machine

    Speedy 360 Cleaning the machine 1. Use the "Z position working table" keys to move the engraving table into a position in which it is easiest for you to clean the surface with a window cleaning agent and paper towels. 2.

  • Page 77: Cleaning The Exhaust Box

    Speedy 360 9.3.1 Cleaning the exhaust box When cleaning the machine, also clean the outside and inside of the exhaust box as well. 1. Remove the fixation screws of the exhaust box. (8 screws) 2. Unscrew and remove and clean the guide plate inside the machine.

  • Page 78: Cleaning The Optics

    We recommend to use the cleaning set enclosed. Alternatively, use high-quality cotton swabs together with the provided cleaning liquid. Trotec recommends to use the following cleaning products, which are available as accessory parts: Lens cleaning cloth Part no.

  • Page 79: Cleaning The Mirror

    Do not touch the mirror with your fingers or with tools, and never use a cleaning tissue twice, as the surface could easily be scratched. Trotec recommends to use the following cleaning products, which are available as accessory parts: Lens cleaning cloth Part no.

  • Page 80: Cleaning The Ultrasonic Sensor (Option Sonar Technology™)

    Speedy 360 9.4.2.1 Cleaning the mirrors #2 and #3 1. For cleaning of mirrors #2 and #3, you must first remove the right maintenance panel. 2. Do not remove the mirror #2. It must remain in the machine for cleaning. 3.

  • Page 81: Troubleshooting

    Speedy 360 Troubleshooting This chapter should enable the maintenance personnel to identify and resolve operational faults based on error messages and symptoms. DANGER Risk of fire from incorrect parameter settings Laser operation with incorrect parameter settings such as power settings, speed or frequency can result in flame formation.
  • Page 82 Speedy 360 Problem Possible Cause Resolution   Choose other shoulder or edit Fine details on stamps are Too steep shoulders engraved too thinly (flat/medium/steep): Options/Process Options/Stamp  Switch off raster correction in  Raster correction ON in ® JobControl ®...
  • Page 83 Speedy 360  Speed too high  Reduce speed Offsets between engraving jobs and cut lines   Contact Trotec support Other faults www.troteclaser.com BA 8032_2.2_EN (05/2016) 83 / 90...

  • Page 84: Contact Details

    Speedy 360 Contact details 11.1 Technical Support In case of questions, contact our experienced local technical support team. For global service contact numbers and further information please see our website, section “Support”: www.troteclaser.com When calling, please make sure that the machine is in your immediate vicinity, and that you have the following information ready (see response form): What happened and what you were doing when the problem arose.

  • Page 85: Disassembly

    Speedy 360 Disassembly WARNING Danger of injury when disassembling the machine There is danger of injury when disassembling the machine. Always wear suitable protective clothing (e.g. safety goggles, safety shoes, safety gloves). DANGER Electric current The machine must be disconnected from the main power supply. Always use suitable tools to disassemble the machine.

  • Page 86: Appendix

    Speedy 360 Appendix 14.1 Acceptance form Dear customer! Please check applicable items: We request your confirmation of Machine parts checked for shipping damage properly completed transfer of the Machine parts checked against delivery note machine Setup of the machine discussed Startup of the machine discussed Please transmit a copy of this Operation of the machine discussed...

  • Page 87: 14.2 Training Verification Form

    Speedy 360 14.2 Training verification form Employee/Trainee: Trainer: Date of Training: The employee named above was instructed in the operation of the ……………………. laser system. Especially the following topics were covered: 1. Machine Function 2. Danger Areas 3. Warnings 4. Position of Emergency Stop Button 5.

  • Page 88: 14.3 Response Form

    Speedy 360 14.3 Response form In case of any trouble with the machine, please provide the following information and additionally create a service file (the procedure for creation of a service file is described on the following pages). Date Machine Details Contact Details Serial Number First Name...

  • Page 89: 14.4 How To Create A Service File

    Speedy 360 14.4 How to create a service file ® 1. Start JobControl 2. Position the job that may cause the error on the plate. This can be done by either double clicking on the job in the queue single-clicking the job in the queue and dragging it onto the plate single-clicking the job in the queue and then clicking on the icon “Position Job”...
  • Page 90 Speedy 360 6. The window „Add Layout File” appears. Please select the layout file that was sent to JobControl ® and possibly caused a failure (e.g.: a CorelDraw file, Photoshop file, AutoCAD file,…). Now click on „Open”. 7. The following window shows the location to which the successfully created service file was saved. 8.

Table of Contents