Applicable Safety Regulations - Trotec Speedy 400 Operating Manual

SERVICE OPERATION
Service activities may be carried out only by authorized, trained service technicians. If side panels as well as covers get
removed and safety devices get bypassed, it can lead to direct and indirect scattered radiation. The service operation is
therefore declared as laser class 4 (US: class IV) and proper precautions need to be taken (see "Laser classification").
2.1.6

Applicable safety regulations

The following directives and guidelines must be observed to avoid hazards when operating Trotec laser systems:
GUIDELINES/REGULATIONS
2006/42/EC
2014/30/EU
APPLIED HARMONIZED STANDARDS
EN ISO 12100:2011-03
IEC 60825-1:2014,
EN 60825-4:2011
IEC 60204-1:2005
ISO/DIS 11553-1:2009-03
IEC 61000-6-4:2007-02
ISO 13857:2008
EN 55011+A1:2016-05
IEC 60825-4:2012-01-01
Notice
Safety norms and regulations.
The general guidelines and directives listed within this manual may differ according to locality, region or
country.
Therefore, always observe the directives as well as the regulations of the institutions for statutory accident
insurance association applicable to you. The operator is responsible for fulfilling all safety requirements,
as Trotec Laser GmbH has no influence on the proper use of the machine.
Observe the official regulations for your business location in accordance with the applicable local legal
regulations (on accident prevention regulations or employee protection), e.g. DGUV regulation 11 for
Germany.
EC Machinery Directive
EMC Guideline
Safety of machinery - General principles for design - Risk assessment and risk
reduction.
Safety of laser products - Part 1: Equipment classification and requirements.
Safety of machinery - Electrical equipment of machines - Part 1: General
requirements.
Safety of machinery - Laser processing machines - Part 1: General safety
requirements.
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission
standard for industrial environments.
Safety of machinery - Safety distances to prevent hazard zones being reached by
upper and lower limps.
Industrial, scientific and medical equipment - Radio-frequency disturbance
characteristics - Limits and methods of measurement.
Safety of laser products - Part 4: Laser guards
Safety
13