Operation; Before Commissioning; Power On/Off - Trotec Speedy 400 Operating Manual

7

Operation

Warning
Personal injury or damage to property due to improper operation.
Improper operation can lead to serious personal injury or damage to property.
– Work on the laser machine may only be carried out by authorized and instructed personnel familiar
with the operation of the machine, observing all safety regulations.
7.1

Before commissioning

CHECK THE FOLLOWING POINTS BEFORE COMMISSIONING:
Completeness and technically flawless condition of the machine and safety devices.
•
Order and cleanliness at the workplace.
•
Cleanliness of optical components (free of dust and dirt).
•
Activated exhaust system.
•
Complete electrical installation.
•
Correct input voltage of the electrical installation.
•
Environmental conditions according to technical specification.
•
Compliance with all laser safety regulations and measures.
•
Fulfill and compliance with all laser safety requirements.
•
If errors or functional deviations should occur during the inspection of the listed points, the machine is not considered
to be safe to operate and must not (no longer) be put into operation until the cause has been clarified!
If you have any questions, contact our experienced Technical Support in your local area.
7.2 Power On/Off
Notice
In order not to restrict or obstruct the freedom of movement of the mechanics, no objects of any kind may
be located in the machining area.
All safety protection covers have to be fully functional and closed.
Operation
51