Trotec Speedy 400 Operating Manual page 52

Operation
SWITCH ON:
Notice
Additionally the ready-to-use state is indicated through the slow flashing of the green status LEDs.
52
1. Switch on the main power supply using the main switch on the rear of the
machine.
The built-in Ruby server starts.
2. Turn the key switch to the right into the vertical position to activate the
touch display.
To start the machine, turn the key switch to the right and hold it against
the spring force. As soon as the machine starts, release the key switch.
3. Referencing process starts.
4. As soon as the reference run of the axes is completed, a signal tone
sounds.
5. The device is ready for operation as soon as Ruby is fully started.