Required Tools For Unloading And Transport; Place Of Storage; Transport Inspection And Reporting Of Defects; Unpacking The Machine - Trotec Speedy 400 Operating Manual

Transport
5.4

Required tools for unloading and transport

REQUIRED TOOLS:
Unloading - Forkli
•
Transport - Pallet truck
•
5.5

Place of storage

Keep the machine sealed in its packaging until it is assembled or installed.
•
The storage location must be dry, free of dust, caustic materials, vapors and combustible materials.
•
Store in a storage room or packaged with adequate weather protection.
•
Avoid exposure of the machine to shocks or vibrations.
•
Avoid extreme temperature fluctuations.
•
Take particular care when packing away electronic components.
•
When storing for a longer period, apply a coat of oil to all bare-metal machine parts.
•
Regularly check the overall condition of all parts and of the packaging.
•
5.6

Transport inspection and reporting of defects

Immediately aer receipt inspect the delivery to ensure that it is complete and has not suffered any damage.
•
If any transport damage is visible, do not accept the delivery, or accept it only with reservation.
•
Record the scope of the damage on the transport documents or delivery note.
•
For all defects that are not discovered upon delivery, be sure to report them as soon as they are detected, since
•
damage claims must be filed within a certain period, as mandated by law.
5.7

Unpacking the machine

Only trained and authorized personnel are permitted to transport and unpack the machine. To avoid falling off of any
wooden parts or tipping of the machine, be very careful when opening the transport case.
Notice
Keep the original packaging case, in case of machine needs to be transported or relocate.
Dispose all waste according to the applicable waste disposal law.
42