List Of Materials - Trotec Speedy 400 Operating Manual

Notice
The exhaust power available for the application will be reduced by e. g. bends, small hose diameters and
long hoses.
You should therefore note the following:
– Avoid bends.
– Keep hose as short as possible.
–
Use hose diameters as large as possible.
Applications generating large amounts of dust or fumes may require a stronger exhaust system. Use of
separate exhaust systems for head and table exhaust may also be necessary.
In this case it is absolute necessary to consult your distributor.
3.4

List of materials

Material EN Material DE
Metal
Aluminum Aluminium
Aluminum, Aluminium, eloxiert
anodized
Chromium Chromium
Verchromte
Oberflächen
Precious metal Edelmetalle
Metal foils up to Metallfolien bis zu
0.5mm (Aluminum, 0,5mm (Aluminium,
Brass, Copper, Messing, Kupfer,
precious metal) Edelmetall)
Stainless steel Edelstahl
Metal, painted beschichtetes
Metall (lackiert)
Brass Messing
Copper Kupfer
Titanium Titan
Cutting
CO Fiber Flexx CO
2
✓ ✓
✓
Technical Data
Engraving
Fiber Flexx CO
2 2
✓ ✓
✓ ✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓
✓ ✓
✓ ✓
✓ ✓
Marking
Fiber Flexx
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
✓ ✓
29