Ultrasonic Sensor (Sonar Technology Tm ) - Trotec Speedy 400 Operating Manual

Maintenance
CLEANING THE MIRROR #4
Mirror #4
8.4.5 Ultrasonic sensor (Sonar Technology
The sensor can be cleaned either with a brush, or be wiped drily, with moisture or with mild detergents and a microfiber
or anti-statics cloth. In case of stronger soiling, isopropyl or ethanol solution can be used.
Avoid long application time and long-term usage.
74
1. While holding the mirror, loosen the two knurled screws (1) and li the mirror
from the mirror holder.
Caution
Make sure that the mirror does not grind over the mirror holder,
as it can be scratched very easily.
2. Flush the mirror with cleaning liquid to wash away coarse soiling.
3. Put some cleaning liquid onto the mirror and leave the liquid for 1 minute to
take effect.
4. Soak a cleaning tissue with cleaning liquid and carefully wipe off the surface.
5. Now carefully re-insert the mirror and fixate it with the two knurled screws.
)
TM