In Case Of Emergency - Trotec Speedy 400 Operating Manual

Wear proper protective clothing (respiratory protection, protective goggles, protective suit, rubber or plastic gloves).
•
Provide ventilation.
•
When approaching the system again, pay attention to odors.
•
Remove all lens fragments.
•
Avoid raising or dispersing dust.
•
Disposal
The ZnSe dust and the lens are to be collected drily and disposed of with fragments, broom, shovel and
protective clothing into hermetically sealable containers or plastics bags as hazardous waste.
Do not dispose of optical components as domestic waste, and do not let them enter the sewer or
water bodies.
Dispose of according to regulations and laws valid in the users' country.
2.9

In case of emergency

WHAT TO DO IN THE EVENT OF MALFUNCTIONS
In unusual operating conditions, open the lid to stop the machining process or, if available, press the emergency
•
stop button and switch off the machine.
If necessary, disconnect the machine from the main power supply.
•
Inform the laser protection officer and your supervisor.
•
Follow the instructions.
•
Repair work must only be carried out by Trotec Laser GmbH service technicians.
•
In the event of a fire: Fight the fire with a CO
•
Notice
Aer a deletion, Trotec Technical Support must be involved before the system is put back into operation.
WHAT TO DO IN THE EVENT OF AN ACCIDENT, FIRST AID
If eye damage occurs due to laser radiation (if the MPD values are exceeded), the casualty must present to an
•
ophthalmologist immediately.
The assumption of eye damage is justified if radiation with laser beams has been used and the MPD values have
•
been exceeded.
First aiders must protect themselves.
•
Switch off the machine.
•
Rescue the injured person from the danger area and provide first aid.
•
Call an emergency doctor!
•
fire extinguisher as far as is possible without risk.
2
Safety
25