Operation
7.9
Options
7.9.1
Rotary attachment
The Rotary attachment is used to engrave cylindrical workpieces.
Caution
Damage to electronics.
Inserting or removing the Rotary attachment while the machine is turned on may irreparably damage the
electronics.
Switch off the machine before inserting or removing the Rotary attachment.
Rotary attachment with cones:
Max. workpiece diameter: 10.6 inch (270 mm)
Max. workpiece length cones: 33.8 inch (730 mm)
Rotary attachment with cones
62
Rotary attachment with rolls:
Max. workpiece diameter: 7 inch (180 mm)
Max. workpiece length:
Ø ≥ 2.2 inch (58 mm) = 35 inch (889 mm)
Ø ≤ 2.2 inch (58 mm) = 37.7 inch (958 mm)
Rotary attachment with rolls